Sewing that's Retro, Geek, and Chic
Tag Archives: custom ironing board
March 19, 2014Posted by on
It has been far too long since I’ve had a chance to sit down and blog! That doesn’t mean I haven’t been sewing – just more work sewing than fun sewing.
At the beginning of January, I decided my sewing room needed a major cleaning/reorganizing. I spent a couple of weeks rearranging the furniture in my sewing room and adding a few new pieces. I think it will really be more efficient in the long run. (More on that to come in a later post.)
I got about 90% finished with the reorg and then I started getting back-to-back jobs and the last 10% has been taking the longest to finish.
But before I got work-busy, I did manage to build myself a new ironing table! Yes, table! No more wimpy ironing board for me! You might recall that I’ve been using the square end of my ironing board and ignoring the pointed end for years.
I’ve always loved the large tables set up in costume shops where I’ve worked (there are usually multiple irons sharing one large surface). It was high time I had my own personal table at home!
And because I know all of you who sew will want one for yourself, I took lots of photos so you can make one too. =)
I’m not sure how long IKEA’s carried this, but I just noticed it recently. It was exactly the size/height I’ve been looking for to use as an ironing table base, and it is solid wood. Plus, it even had the bonus of drawers and shelves!
So for $149.00, I had the perfect table base and I didn’t have to engineer anything from scratch. (I still find it amusing that the least expensive large piece of furniture in my sewing room is the cutting table!)
The dimensions of the NORDEN sideboard are 47½” long x 16½” wide x 35⅜” tall. The height was perfect but the top surface was a little small. I needed something that wasn’t too big and would fit along the wall where I already had my ironing board without blocking the closet door.
First, I constructed the sideboard table exactly as the IKEA comic book instructed because I had come up with my own simple plan to make the surface bigger without having to alter the original design.
I wanted a surface area that was significantly larger than my ironing board, which measures 13½” wide x 53” long (to the narrow pointed end). I decided 60” long would be a decent size to fit my space while still being long enough to iron fabric yardage in one pass from selvage to selvage.
I also determined that 19” wide would not take up too much space in my room – I had to be careful not to make my sewing room feel crowded with the other furniture rearranging.
Then, my husband and I went shopping to buy some supplies at the home improvement store:
- 1 piece of 19” x 60” plywood ¾” thick (we bought a full 4’ x 8’ sheet but had the store cut it to size)
- 2 square dowels 1” x 36” each
- 10 flat headed Phillips machine screws size #6 – 32 x 2 in
- 10 nuts to fit the #6 machine screws (ours came in packs with the screws)
- 10 flat washers size #6
We already had these but you will also need:
- 1 wood drill-bit 5/32”
- Measuring tape or yardstick
- Staple gun & ½” staples
- Adjustable crescent wrench or socket wrench (to fit nuts)
- Nail setter or a piece of flat metal you can hammer to completely set the staples
- Any kind of (power or hand) saw that can cut 1’ square dowels
- Gloves (recommended for handling the plywood)
- Safety glasses/goggles
We cut each square dowel into 3 pieces measuring 3”, 14.5”, and 18.5”. The small 3” pieces were a good size to keep the dowels from blocking the drawers on the front of the sideboard. Exact size is not important as long as you are able to frame each corner of the existing tabletop with the dowels.
We turned the IKEA unit upside down, placed it on the plywood top, and marked it so the base would be centered on the plywood lengthwise. (Note: make sure you remove the adjustable shelf before turning table upside down!) We offset the sideboard table a little closer to the front edge so that the dowel would be flush with the edge of the plywood (thus, prettier and easier to cover).
Then we put some extra plywood scrap on the floor underneath everything. This was so we could drill all the way through the plywood top without worrying about drilling into the carpet beneath.
Starting with the two small front dowels, we butted them up to the edge of the sideboard and drilled one hole all the way through the dowel and the first layer of plywood that would be the new top.
Then we unstacked everything and put bolts through from the top (the part that was facing the floor while drilling) and attached them with washers and nuts on the dowels on the bottom.
After that, we did the same with one dowel on one side – drilling one hole on each end because this piece of dowel was longer.
We continued drilling, unstacking, and attaching one dowel at a time so we could make sure everything fit perfectly and would be tight around the sideboard.
Finally, we had the dowel frame all attached. It didn’t matter that the bolt heads weren’t perfectly flush with the top surface because I knew the padding I would be putting over everything would smooth any height difference out. As long as the dowels were secure on the plywood, it was perfect.
I initially had plans to secure the plywood top to the IKEA sideboard after covering it with appropriate ironing fabric, but it ended up fitting so snuggly we didn’t need to. For once, one of my crazy IKEA hacks actually turned out to be less complicated than originally planned! Win!
You may have noticed I was able to move my fabric tubes from under my cutting table to under my new ironing table. This was perfect because with my new furniture arrangement, the tubes were a little more in the way under the cutting table.
Next came the hard part: waiting for specialty fabric to come in the mail so I could cover the plywood top.
The best ironing tables in costume shops are covered in a drapery interlining fabric called English bump cloth. I read somewhere (apparently I failed to save the link) that it was first used as a curtain interlining for British royalty in order to better insulate palaces from the cold and damp.
Bump cloth is a thick, somewhat flannel-like fabric that adds body and structure to fancy drapes.
I found some at Fabric.com in my first search and placed an order. Even though the website said there was around 40 yards in stock at the time, I received an email a couple days later saying they were sold out. Grrr. (I have had such rotten luck with Fabric.com completely filling my last few orders!) If you feel like taking a chance with them, here’s the link for their Hanes Drapery Interlining Bump Cloth listed as item #UK-528.
Once I learned I wouldn’t be receiving my first order of bump cloth, I started looking elsewhere. I eventually found some at BuyFabrics.com and it was less expensive than Fabric.com’s! I quickly ordered 2 yards (I was planning to use two layers to cover my plywood top) and they shipped within 24 hours! Here’s their link for English Classic Bump Natural Interlining.
While I waited for my bump cloth, I went to my local JoAnn Fabrics and purchased 2 yards of aluminum coated ironing board fabric in their utility fabric section. (You can also buy it on their website.) I knew I wanted another silver ironing surface like I had on my ironing board before because it looks better for longer. Most costume shops cover their ironing tables in muslin, but leakage from irons stains muslin.
As of yesterday, Fabrique! (the little fabric store where I work part-time) also started carrying silver ironing board fabric! You can order it from the website as well. From what I can tell, this fabric might have a slightly heavier muslin backing for the aluminum than what JoAnn sells. Too bad I wasn’t able to buy it from work when I needed some!
Finally, my bump cloth arrived and I could finish my ironing table!
The following steps can be used to cover any wooden table surface to create an ironing table if you already have a piece of furniture and don’t want to buy a NORDEN sideboard.
I discovered, even after pulling the bump cloth tight, there was still too much slack when I rubbed the top surface. So I pushed the extra up toward the front of the tabletop while my husband held and spring clamped the excess in place.
Once the plywood top was completely covered, we just pushed it in place on the sideboard. It fits nice and snug. If I ever need to recover it, I can just take the top off and change out the fabric that needs to be replaced. Super easy. =)
I love my new ironing table!
Bonus: I no longer need to iron yardage in steps before I roll it – I can roll as I iron! And all my ironing tools fit in one drawer while my press cloths & ironing products (aside from interfacing) all fit in the other drawer. I chose to hook my sleeve board over the right edge of the tabletop because I use it often and it makes the tool drawer a bit crowded. I don’t need to leave everything on the open shelf above where it gets dusty – now I only keep spray bottles and sizing etc. on the shelf above.
I just need to clean up the used gravity-feed industrial iron I bought used years ago, and I’ll have totally finished my ironing upgrade!
I hope you find the above tutorial helpful and are inspired to build your own ironing table! Send me a photo or link if you do – I’d love to see!