Welcome to Custom Style!
To learn a little about Brooke click here
To read the post about this photo click here
Join 460 other subscribers
Sewing that's Retro, Geek, and Chic
I have officially started my vintage pattern testing for The 1912 Project that I mentioned previously. We are only required to make a mock-up of one garment a month, but I told myself that I would make a finished garment of the patterns I like… as long as I don’t have to buy many supplies.
I tackled the February Challenge Pattern mainly because I like it but also because I have yet to receive the pattern for my group – I’m in Group 4.
(Feel free to click pictures to enlarge for detail.)
The instruction sheet for the vintage slip with princess seams had a list of 3 types of lace for a total of 16 yards of trim!
I had never tried to sew insertion lace so I really wanted to make the real thing (not just a mock-up sans trim like I usually do when testing a pattern), so I printed my pattern in half-scale to fit my miniature dressform with the proportions of a woman with a 36-inch bust. (Making something in half-scale means half the amount of trim – woohoo!)
I went digging through my box of lace. I didn’t really have anything that had the two straight sides that qualifies as insertion lace. However, I did have some pieces of 3½-inch wide lace that was horribly scratchy (good thing no one will ever be wearing this lace!) and would work for all three types of trim I needed – if I cut it apart.
In my fabric stash, I found the perfect piece of pale sky-blue cotton voile. It is the thinnest semi-sheer fabric with a soft drape – I knew it would be perfect. (When I can, I like to make my mock-ups in scrap fabric similar to the final garment fabric in hopes that the mock-up itself can be usable – every so often I get lucky, like I did when making my Forties style dress.) I also had enough fabric if I needed to re-cut anything that needed major adjustments.
But the lace was bright white, and I hated it paired with the fabric.
So I tea-dyed the lace. It dyed a lovely light peachy color that was a beautiful compliment to the pale blue. Easy fix. =)
The first thing I did after printing my tiny pattern was cut off all the seam allowances so that I could truly test it.
I pencil-traced the stitch-lines directly onto the fabric.
Next, I cut out my pieces, adding an unmeasured seam allowance around all the lines.
Then I pinned directly through my lines (ignoring all the uneven seam allowances), matching points and the notch marks I made for myself, and stitched right on the line.
There was only one major alteration needed for this pattern: the princess seams were majorly far apart. According to a standard measurement chart in one of my books, the bust point to bust point measurement for a 36-inch bust is 7½ inches, and the pattern was measuring at the equivalent of a 42½-inch bust. I just lined the seams up to the proper spot on my little dressform (like I would do for any garment I was fitting on the person I was making it for) and put a seam down the center front. I took out the equivalent of 2 inches from the pattern.
Luckily, I knew a center front seam would disappear once I added the trim. I made some minor tweaks to the rest of the pattern, but nothing out of the ordinary required for a custom fit.
When I was convinced that the pattern lines were good, I decided to trim out the mock-up and make a finished miniature model.
I tried a sample finish for the inset lace with my thin cotton voile fabric. I straight-stitched the edges of the lace to the right side of the fabric, zig-zagged over the previous stitch, and trimmed the fabric under the lace trim close to the stitching.
On a full-scale slip-dress, I would hand-sew a tiny rolled-hem instead of trimming next to the stitching, but my half-scale seam allowance was a bit small & awkward to roll (and besides, it isn’t going to get the wear-and-tear that a real dress would).
I planned the order of my lace application and joined the shoulder seams so that I could trim the neckline all at once.
When I was finished sewing all the insertion lace, my little dress was happily just as pretty on the inside. =) I enjoyed trying my hand at insertion lace.
Then it was time for fun with pleats! I had the fortunate idea to use sizing on my fabric before I started pleating it – if only I had thought of using it sooner! (It would have really given the rest of the dress a more polished look.) I knew sizing would keep the drapey fabric from shifting too much when I was folding straight lines for pleats.
Sizing gives fabric a little bit of body but isn’t stiff like starch. I can find it at any of my local grocery stores but you can also find sizing on amazon if you need to order some.
I cut my strip of fabric for pleats then pre-hemmed one long edge and added a stripe of inset lace. Then I machine basted (longest stitch with no backstitching) all my pleats. I did a TON of math to make sure I had enough lace required to make the adequate amount of pleats and cheated my pleats accordingly. (I barely eked out the lace I needed – I had to piece it with scraps in two places.)
Once I had a row of pleats, I ironed them all in one direction (the direction that best hid the couple of fabric flaws I couldn’t cut around) and serged the top edge. Then I attached one edge of the insertion lace that joins the pleated flounce to the bottom of the slip-dress. I made the strip of pleating as long as possible so that I could cut off the extra couple inches after matching the pleats at the center back seam. (The basting stays in until the dress is finished, which keeps the pleats from shifting during construction.)
I test-pinned my pleats to the dress and adjusted for a level hem. I had a bigger seam allowance because I attached the lace to the seams separately, so I was able to hand-stitch a rolled-hem like a true vintage slip-dress would be finished behind all the insertion lace.
After the flounce of pleats was attached and a little ruffle of lace was hand-sewn around the neck & armholes, I had fun removing all the pleat basting.
I haven’t yet decided on the details of the center back row of buttons. I have some small standard buttons but I may want shank buttons that close with loops.
And now for the (nearly) finished dress! Aside from the pins down the center back, everything else is complete.
Can’t you just imagine one of the Crawley girls of Downton Abbey wearing something like this?
I think I may sew myself a camisole top by making an adaption of this pattern – without buttons all the way down the back.
The pattern would make a sweet retro wedding dress with a plain under-slip for a lining. It would even be a fun modern dress with maybe appliqué trim instead of inset lace – I have some thin cotton shirting in a bright floral print that that would be perfect for summer.
Oh, the ideas inspired by a vintage pattern from the Titanic era!