Welcome to Custom Style!
Join 460 other subscribers
Sewing that's Retro, Geek, and Chic
So much has been going on since I last posted, I’m not really sure where to begin! I guess I’ll just jump right in with the most unexpected news:
My sewing machine is terminal.
If I were superstitious, I could say that Macbeth killed my machine, but I know that I’ve made my machine work harder in a day or two than most sewing machines ever even come close to working after somebody takes them out of the box.
Honestly, I’m rather surprised that I’ve managed to make a modern, overly-plastic domestic sewing machine last for almost 14 years! I’ve had to sew things I knew would abuse my poor little machine many times. But I’ve seen modern domestic machines bite the dust after only 3 or 4 years of mileage in a costume shop, so I think I was pretty good to mine, considering.
I noticed a little weirdness with it near the very end of the Nike commercial shoot. I thought it was because I was sewing so many sports jerseys. That fabric had a residue to it, which I thought might have built up on my machine, causing it to protest.
Two days later, before I could even unpack my machine from the Nike gig, I got a last minute call to go sew for some promos for the show “Big Rich Texas”. They wanted a pleather cover for a mechanical bull to look like a Chanel purse (yes, I get paid to do the weirdest things!), and my machine didn’t give me any trouble then.
When I came home from that, I cleaned my machine up a little, put in a new needle, and leisurely started sewing some mockups. It seemed to be just fine.
Then I did a 13 hour day, an 11 hour day, and a 12 hour day of Shakespeare sewing at my home shop (it became a rather big build when it wasn’t supposed to be that kind of show), and in my pedal-to-the-floor sewing, my machine started sporadically acting up – for no apparent reason.
I would be sewing a long straight seam (on two layers of cotton bedsheet fabric) and suddenly, halfway through the seam there was bobbin vomit. Now usually bobbin vomit (lots of loopy, loose stitching on the bottom of the seam) is easy to fix if you just unthread and rethread your machine.
So I did. And sew I did.
But it kept happening. On every. Single. Seam. ARG!
I just plain didn’t have the time (or patience) for it, so I put my machine aside with plans to take it to the doctor when I had a day off, and I pulled out my backup machine for the remainder of the build.
I finished the 31 costume pieces that needed to be built at home (it still looks like Scotland barfed in my sewing room), and I did a bunch of alterations at the theatre itself – they have a vintage Kenmore sewing machine for backstage repairs that I rather liked, even if it needs a little tune-up.
Since the play officially opened on Friday, my job on the show is finished. I have another job coming up in October for a movie shoot that will probably wrap around the first week of December.
So I suppose my machine picked the most convenient time to act up – I have work, which means I have the money to do something about it.
When I dropped my machine off at the “hospital” I was able to pick up one of my other machines that I had taken in for service recently. It is a vintage Singer Featherweight 221 that I inherited a couple of years ago from my grandmother.
When my grandmother died, I told my mom while she and her siblings were going through their mom’s stuff that I would take the sewing machine if no one else wanted it. No one did, and much to my surprise, they handed me two sewing machines – the modern one I remembered my grandmother using (which I used when I went to visit her) when I was a kid AND the little vintage Singer!
I had no idea she had the old Singer (it was probably in her closet for decades) and I *may* have squealed and jumped around for a few days after it was given to me.
The only reason I didn’t start using it immediately after I got it was because the casing on the power cord was brittle & cracked, and I was concerned I would end up shocking myself.
A couple of days after dropping off my workhorse machine, I got a call from one of the repair guys at the place where I took it.
It was sad news: my little modern machine had two “cracks” in the timing mechanism and 3 cracks in some other part I’ve forgotten. Newer Singers are essentially disposable because almost as soon as a machine is built, they stop making parts for it. So it’s not really fixable.
(Now before you start to feel sorry for me, let me just say that I had a plan and solution in motion 24 hours after I was given the grim diagnosis.)
Part of me got a little nostalgic about my machine. It was the first machine I bought for myself and it never gave me any problems until recently.
I used it for my wedding, my sister’s wedding, Camille’s wedding dress, and for at least 4 other wedding gowns over the years. But the very first things I built with it were two rabbit puppets I designed for a children’s theatre production of The Velveteen Rabbit my sophomore year in college.
I let some of the other theatre majors at the time do the distressing of the “older” version of the puppet and then I “patched” it up. They literally had to run over the poor thing with someone’s car just to make it look loved enough to be seen from the audience. (I’m glad I wasn’t there to watch!) Ahh, memory lane…
Anyway, back to my dying sewing machine. (Maybe like the velveteen rabbit, a fairy will come save it from the trash heap.)
But another part of me was really excited because this would be the first time I would be looking for a machine after having sewn on countless machines both new & old in a variety of industrial & domestic versions throughout my career.
Now I can confidently say what features I like and what I dislike in a sewing machine. And because I am so sure about what I want, I can almost immediately narrow down my choices by about 80% leaving only a few options to research fully.
My grandmother’s vintage Singer isn’t a good replacement option because it cannot do a zigzag stitch – it’s a straight stitch only machine (unless you use a fancy attachment). And I absolutely MUST have a zigzag stitch.
It’s also really tiny, which would make it difficult to do some of the bulky costume work I’ve been called to do – like, oh, pleather mechanical bull covers.
Who knows what it was that caused me to damage my sewing machine in the first place. I may have been sewing for years with cracked parts – they just weren’t bad enough to cause problems until now. My machine served me well and it worked hard for as long as it could. Even in the end, it kept trying.
I have my plan in motion to replace my workhorse machine – I’m just watching my mailbox for my next paycheck at this point.
Stay tuned for And here’s my solution… Even if you don’t sew, I think you’ll like it. =)