Welcome to Custom Style!
Join 459 other followers
Sewing that's Retro, Geek, and Chic
So over the course of a week, I made myself three pairs of skinny pants.
Way back in… APRIL!
(I am so far behind in blogging!)
I needed some more work pants for my part-time job at the fabric store and I decided I’d make some because 1) I hate pants shopping and 2) pants are easy to sew once you have a well-fitting pattern.
I’ve never really bothered to draft myself a custom pants sloper because I’ve always been able to find jeans that fit me if I search long enough in stores.
My biggest problem with ready-to-wear (RTW) trousers is the fit of the waistband. Most waistbands seem to be cut like funnels – hips and crotch curve might be perfect but the back waistband majorly gaps on me. (I have, however, found a couple of brands and specific style numbers in those brands that actually fit well, even in the waistband.)
So I pulled out Butterick pattern 5682, traced it in my size according to the size chart, and then compared it to two pairs (different brands) of store-bought skinny jeans that fit me really well.
I don’t remember all the exact changes I made, but the main differences between the RTW and paper pattern were the leg width, the height of the waistband (especially in the front), the back pocket size, and the crotch curve.
I needed to trim down the crotch curve – more noticeably at center back than front. If you can get the crotch curve right, that’s half the battle for fitting a pair of trousers!
The pattern only included one pocket size, which meant that it was proportionally wrong for most of the sizes in the envelope. Proper pocket proportion and placement is important! (Afterall, you don’t want “gateway mom jeans” because of “dinosauric pockets”.)
So I reduced the pocket size to match my RTW skinnies and referred to the factory placement when making my own.
With my pattern corrected well enough on paper, I pulled out some black metallic stretch denim I had. There was enough yardage to re-cut if I needed any major alterations, but I was fairly certain the fit would be close enough to the RTW jeans I like.
I decided to use some fun cotton fabric to line the front pockets. No one will ever see it but I know it’s there! =)
After a quick assembly and matching the details on my RTW pairs, I had a pretty good first pair.
I ended up adding half an inch to the hem length on the pattern but the black pair is just long enough. I also curved the waistband a little more to prevent my next pairs from having the slight gap at center back that the black pair has.
Knowing that I never tuck my shirts in, especially when wearing skinny pants, I called the metallic black pair “good enough”…
…and moved on to a second pair – this time in a floral print stretch jacquard:
I carefully cut the fabric so the stripey-ness of the floral print would match across the legs and then broke up the print on my tush with intentionally unmatched pockets – something that will hardly ever be seen because of that untucked shirt thing, but still.
I still had one 3-inch metal fly zipper left, so I decided to make a third pair of skinny pants out of some textured stretch jacquard. (I love love love this fabric! You will be seeing it again because I bought it in 4 different colors.)
I didn’t do anything fun for the pockets on my floral print pants because the pants themselves where fun enough. I decided the teal pants needed interesting pockets though.
I had three good options in my cotton print stash – Tube map, tiny turtles, and bigger happy turtles. So I turned to Instagram/Twitter for a vote.
My first try-on and I think I finally got the waistband curve exactly right! Third time’s a charm and all that. This pair of pants is definitely the most comfortable.
I did more topstitching detail on my teal pants than I did on the other two pairs. I also cut them out one layer of fabric at a time in order to keep the textured design evenly horizontal across each piece – typical making-things-overly-complicated-just-because-I-can mode of operation.
Here’s a back view of the finished teal pants. (After all the picture sorting and editing, I’m reeeally tired of looking at my butt!)
Pair number four will be perfect – if I ever decide I need to make myself another! I went ahead and corrected the pattern just in case.
I chose to mimic the look of the buttonholes on my RTW jeans. I made the loop by tracing around the shank of the jeans tack button and bringing it to a point. I used some embroidery/cross-stitch thread and just zig-zag stitched over it following the line I drew.
I’ve been wearing all three pairs of skinny pants a lot for my retail job at the fabric store. The metallic black pair is a little too warm in the summer (all that metal retains body-heat and reflects it back) but it’s a nice basic without being boring because of the sparkle. The floral pair is just plain fun & trendy. And the teal pair is super comfortable and probably my favorite.
So anyway, I made some pants. Trousers. Whatever.
And it took me so long to blog them, that it seems everyone else in the online sewing community has now made and blogged their own in the meantime! Ahead, but behind all at the same time.